澳金沙现场娱乐官网(中国)有限公司

Water-soluble cutting fluid

Contact us

Company Name: Kunshan Hao Hong lubricants Limited

Contact: Manager Li

Tel: 18012694866

Customer Service: 18914053614

Fax: 0512-36839892

E-mail: haohongrunhuayou@163.com

Address: Suzhou City, Jiangsu Province, Kunshan City Zhangpu Jinhua West Village plant

Lube oil storage and transportation

Your current position: Home >> News >> Corporate

Lube oil storage and transportation

Date of release:2017-11-28 Author: Click:

The correct way to store and handle the lubricant helps preserve the quality of the lubricant. Appropriate protection and storage bin lubricant, can make the application more convenient. Therefore, we really can not ignore the appropriate storage lubricant procedures in order to preserve the quality of lubricants, and should be retained after a warning signs and so on.


As a general rule, all lubricants should be stored under cover. If the outdoor place is required, can be covered with oil and canvas on the bucket. To prevent the lubricant of special compounds, due to weather or temperature change and deterioration.


Moisture can contaminate the oil or grease inside the barrel and it can also rust the interior of the barrel. All, to avoid water pollution is very important.


In order to reduce the temperature drop caused by inhalation of the barrel mouth is a phenomenon of moisture, all the barrel should be horizontal, barrel mouth in the "three o'clock" or "nine o'clock" position. If the barrel body is upright, the water will accumulate on the barrel surface, which will be slowly sucked into the barrel by the mouth of the barrel. However, if the bucket body can not be placed horizontally, it must be erected. The side of the bucket should be stripped of wood to make the bucket slightly inclined, and the bucket cover should be located at the position of "three o'clock" or "nine o'clock" Water intrusion. Should regularly check the barrel body to prevent oil spills.


When the bung has been opened, care should be taken not to allow contaminants such as water, dust, etc. into the barrel from the mouth. To reduce the chance of contamination, hand pump or hose switch should be used to drain the oil. The impact of contaminants on greases is especially important because grease impurities can go directly into the machine. Attention to any fine dust particles, can cause mechanical wear.


All in all, it should be kept clean and stored systematically whether it is placed indoors or outdoors. In this way, it is of great benefit to lubricate the workers and machinery responsible for the lubrication.


In addition, the handling of grease is also very important. Add containers, hand pumps and hoses, etc., to be kept clean and properly stored. Store different lubricants and waste oil should be marked to prevent confusion.


The address of this article:/en/news/348.html

Related labels:Hydraulicrailoil

service
  • QQQQ
二维码

Scan QR code

share 一键分享
Please leave a message for us
Please enter the message here and we will contact you as soon as possible.
name
name
phone
phone
mail
mail
address
address

澳金沙现场娱乐官网|澳金沙现场娱乐官网

XML 地图 | Sitemap 地图